Porter Cable Nail Gun Parts | Easy Replacement Solution

Do you know what OEM is? Well, OEM stands for Original Equipment Manufacturer. That’s mean some of the machine parts are replicable, and you will get them from the original manufacturer. The Porter-Cable nail gun has some replaceable parts too. You will need porter cable nail gun parts if the existing parts show some defects or stop working like before.

In this content, you will know about the replicable parts of the porter cable nail gun, and you will also find information on the places where the parts are going to fit. Again you will know about the porter cable nail gun and the necessity to use a porter cable nail gun. So, let’s start.

Why You Need the Porter Cable Nail Gun Parts?

Why do you need a replaceable part for you nail gun is a common question asked by lots of people. Well, when you will work with your nail gun for a long time the parts of the gun may get damaged for friction or other reasons.

There are some major parts in a nail gun which are frequently damaged for the excessive friction entirely. Like-

O-ring

This specific part is designed to seal the air. You will find this part in between two other parts. You will need this part in numbers as it will damage after a certain period of time for compressed airflow.

Overhaul Kit

An overhaul kit helps to stop leaking air from the head, nose or trigger of the machine. So, it’s an important part and you need to change the kit after someday of working.

Bumper

As a nailer is a high-speed movable machine the parts damage in a short time and bumper is one of them. Bumper helps to generate the power to insert a nail into the woods.

Trigger

Every time you start the machine, you will need the trigger to push in. So, it’s also the most used part in a nail gun. You need to keep a replaceable trigger with you.

Piston

A piston is an important part of a nail gun as it generates the hitting pressure to the nail inserting. You will need a replaceable piston for your nail gun because it may stop working after heavy uses. 

Different Parts for Porter Cable Nail Gun

There are various replaceable parts for porter cable nail gun are available, and you can know about them from here. So, let’s see.

1. Porter-Cable FC350A/FR350A/FM350A OVERHAUL Kit # 910450

amazon-buy-buttonyIt’s an OEM part, and it is an overhaul kit that is used to seal the airflow. The weight of the part is 0.8 ounces, and the dimension of the product is 8.2 x 8.2 x 1.8 inches.

This part is compatible with- FC350A Type 1, FC350A Type 2, FM350A Type 1, and FR350A Type 1.


2. Porter-Cable 903775 Overhaul Kit for Brad Nailers and Stapler Kit


amazon-buy-buttony

This overhaul kit is also used to seal the airflow. It’s made of rubber material. The weight of the part is 2.88 ounces, and the dimension is 6.5 x 3.2 x 1.8 inches.

This part is compatible with NS100A, BN125A, BN138, BN200A, BN200V12 Type 1, BN200V12 Type 2, FCP350, NS150A Type 1 and NA150A Type 2


3. Porter-Cable BN125 OVERHAUL Kit # 903754


amazon-buy-buttony

This is another sealer for air entrance, which blocks the air from leaking. It’s an OEM part which is of 1.28 ounces in weight. The dimension for this part is 1 x 1 x 1 inch.

This overhaul kit is compatible with BN125 Type 1, BN125 Type 1, and BN200 Type 1.


Porter-Cable 910767 PU Collar

amazon-buy-buttonyThe PU collar is an authorized part of the nail gun. It helps to seal the head valve and made of rubber. The weight of the collar is 0.8 ounces, and the dimension is 1 x 1 x 1 inch.

This part is compatible with various porter cable models.


Porter-Cable 904749 Collar


amazon-buy-buttony

This part is also used to seal the head valve, and it’s an OEM part to replace. It is made of rubber material, and the weight of the part is 0.32 ounces. The dimension for the product is 1 x 1 x 1 inch.

This part is compatible with various models of porter cable nail gun.


Porter-Cable 886113 Piston Bumper


amazon-buy-buttony

This piston bumper is used in a nail gun and stapler to give necessary force. The weight of the product is 0.8 ounces, and it is made of rubber. The dimension for the product is 5 x 5 x 4 inches.

This piston bumper is compatible with the RN175 model of the nailer.


Porter-Cable RN175/FN250 Replacement (2 Pack) Piston Bumper # 886113-2pk


amazon-buy-buttony

It’s a genuine replicable part for the nail gun, and you will get two-piston bumpers in one packet. It is used in the piston of the machine to gain the force that is required. The weight of the product is 0.8 ounces, and the dimension is 1.8 x 3.5 x 1.8 inches.

This piston bumper is compatible with RN175 Type 1 Nailer, RN175 Type 2 Nailer, FN250A Nailer, NSS150 Super Stapler.


Porter-Cable 904689 Seal-Head Valve


amazon-buy-buttony

This is an OEM head valve for the Porter-Cable Nail Gun. This part seals the head valve and made of plastic. The weight of the product is 0.16 ounces, and the dimension of the product is 1 x 1 x 1 inch.

It is compatible with FN250B Type 1 and FN251 Type 1.


Porter-Cable FN250C Finish Nailer Kit (2 Pack) No Mar Pad # 1000003300-2pk


amazon-buy-buttony

It is a finishing kit for the porter cable nail gun, which is an OEM replaceable part for the nailer. The weight of the product is 0.32 ounces, and the dimension is 6 x 8 x 0.8 inches.

This part is compatible with Porter-Cable FN250C Type 1 16 Ga. 2-1/2″ Finish Nailers Kit.


886137 Porter Cable NOSE CUSHION for FN250A Finish Nailer Genuine OEM


amazon-buy-buttony

Cushion for the nose of the nail gun, which is an OEM replaceable part. The weight of the part is 0.16 ounces, and the dimension for the part is 0.5 x 1 x 1 inch.

This part is compatible with PORTER-CABLE: FN250A.


Porter-Cable FN250C Finish Nailer Kit (2 Pack) No Mar Pad # 1000003300-2pk


amazon-buy-buttony

Finish nailer kit, which is used to hold the nose of the machine. The weight of the part is 0.32 ounces, and the dimension is 6 x 8 x 0.8 inches.

This part is compatible with Porter-Cable FN250C Type 1 16 Ga. 2-1/2″ Finish Nailers Kit.


Porter-Cable 904685 Piston Stop


amazon-buy-buttony

To stop the piston reciprocation motion, this part is widely used in a nail gun. It’s an OEM replicable part for the nail gun. This part seals the head valve also. The weight of the product is 0.32 ounces, and the dimension is 1 x 1 x 1 inch.

This part is compatible with FN250B Type 1 and FN251 Type 1.


Porter-Cable 64762000 Trigger Valve Assembly


amazon-buy-buttony

This specific part is used for triggering the valve assembly, and it is made of plastic and metal. The weight of the part is 0.16 ounces, and the dimension for the product is 1 x 1 x 1 inch.

This part fits with various porter cable nail gun models.


886137 Porter Cable NOSE CUSHION for FN250A Finish Nailer Genuine OEM



amazon-buy-buttony

This part is a nose cushion that is used to hold the nose of the machine. It’s a genuine part to replace. The weight of the part is 0.16 ounces, and the dimension is 0.5 x 1 x 1 inch.

This part is compatible with PORTER-CABLE: FN250A.


Porter-Cable FN250C Replacement O-Ring Kit # N001119


amazon-buy-buttony

O-ring is used to seal the air in the junction of two major parts. The O-ring kit comes with a bunch of rubber and plastic rings. The weight of the product is 2.24 ounces, and the dimension for the product is 1 x 3 x 16 inches.

O-ring kit is compatible with Porter CableFN250C Type 1 16 Ga. 2-1/2″ Finish Nailer Kit.


Porter-Cable 905017 Driver Maintenance Kit with Piston O-Ring and Driver


amazon-buy-buttony

This product comes with an O-ring kit for the piston and a driver maintenance kit. The weight of the product is 6.2 ounces. The dimension for the product is 8.1 x 4.2 x 1.8 inches.

This product is compatible with DA250B Angled Finish Nailer.


Superior Parts SP A00104Q Aftermarket O-Ring (Premium Quality) for Porter Cable NS100A, NS150, BN125A & BN200A – 1pc/pack


amazon-buy-buttony

This part is a power tool replacement part, which is similar to the O-ring. This is not an OEM part. The weight of the product is 0.32 ounces, and the dimension for the product is 5 x 3.5 x 0.5 inches.

It is compatible with porter Cable NS100A, NS150A, BN125A and BN200A


Porter-Cable 9R199845 No-Mar Tip


amazon-buy-buttony

This No-Mar Tip is an OEM authorized part that is used as an air vacuum rubber hose. The weight of the product is 0.32 ounces, and the dimension is 1 x 1 x 1 inch.

This part is compatible with various porter cable nail gun models.


Porter-Cable RN175/FN250 Replacement Overhaul Kit # 903789


amazon-buy-buttony

It’s an overhaul kit that is used to seal the air. This kit is OEM authorized, and the weight is 4.6 ounces. The dimension for the product is 8.4 x 8.4 x 1.9 inches.

The kit is compatible with Porter-Cable: RN175 Type 1 Nailer, RN175 Type 2 Nailer, FN250A Nailer, NSS150 Super Stapler.


PORTER-CABLE BN18PP 18 Gauge Brad Nail Project Pack


amazon-buy-buttony

In this pack, you will get small trim, shoe molding, and baseboards nails, and it’s a fastener gauge. The weight of the pack is 9.6 ounces, and the dimension of the product is 0.6 x 2.6 x 6.3 inches. This product is built with steel.

This product is compatible with D51238K, DC608K; Porter Cable: BN200A, BN200B.


Porter-Cable FN250C/DA250C Replacement Trigger Kit # 634174-00


amazon-buy-buttony

This trigger is used for turning on the nailer, and this is an OEM replaceable part. The weight of the product is 0.32 ounces, and the dimension is 2.10 X 0.70 X 0.75 inches.

This trigger is compatible with DA250C Type 1, DA250C Type 2, FN250C Type 1, FN250C Type 2, FN250C Type 3.


Porter-Cable FR350 OEM Replacement BOTTOM FIRE Trigger # 5140030-09


amazon-buy-buttony

The bottom fire trigger is placed at the bottom of the nail gun, which is a genuine replicable part. The weight of the part is 0.8 ounces, and the dimension of the part is 3 x 3 x 4.2 inches.

It is compatible with model-FR350 and FN250A.


Porter-Cable 890725 Urethane Retainer


amazon-buy-buttony

This part is used to consume the lubricating used in the machine. The weight of the product is 0.16 ounces, and the dimension is 1 x 1 x 1 inch.

This part is compatible with various porter cable models.


Porter-Cable RN175/BN125 Replacement Trigger Pivot Pin # 890722


amazon-buy-buttony

The trigger pivot pin is used to help the trigger for performing in a motion. This part is made of steel, and the weight is 0.16 ounces. The dimension of the part is 0.1 x 0.1 x 1.1 inches.

This part is compatible with BN125A Type 1, BN200A Type 1, BN200V12 Type 1, BN200V12 Type 2, COIL200 Type 1, FM350A Type 1, FN250A Type 1, FR350A Type 1, FR350MAG Type 1, FR350MAG Type 2, FRP350 Type 1, RN175 Type 1, RN175 Type 2.


WORKPRO 16-inch Wide Mouth Tool Bag with Water Proof Molded Base


amazon-buy-buttony

This bag is waterproof and used to carry the porter cable nailer machine and other equipment. The weight of the bag is 12.3 ounces, and the dimension is 15.8 x 8.7 x 9.8 inches. This bag is available in blue and black.

You can carry all the models of porter cable nail guns in this bag.


Darller 200 Pack Nail In Cable Clips Ethernet Cable Nails Tacks Clips 7mm for Cat6 Cable – White


amazon-buy-buttony

This is an external part of the nail gun, and this clip is used to insert the nails easily into the wood. The weight of the product is 0.16 ounces, and the dimension is 4 x 1 x 0.8 inches.

It is compatible with all kinds of nails.


Coceca Hardware Nail Assortment Kit 200pcs, Galvanized Nails, 4 Size Assortment


amazon-buy-buttony

With four size assortment, the coceca nails are used to attach the wood part with another one. You will get 200 pieces in one kit. The weight of the product is 4.8 ounces, and the dimension is 4.3 x 3.6 x 0.5 inches.

This product is made of iron.


PORTER-CABLE 904673 Warning Label


amazon-buy-buttony

The warning level is placed on the body of the machine, and it’s an OEM part. The weight of the part is 0.16 ounces, and the dimension is 1 x 1 x 1 inch.

You can use this warning level in any porter cable nail gun.


PORTER-CABLE PBN18125-1 1-1/4-Inch 18 Gauge Brad Nails, 1000-Pack


amazon-buy-buttony

Gauge brad nails are used to attach two pieces of wood. This product pack contains 1000 pieces of nails. The weight of the product is 8 ounces, and the dimension is 6.3 x 2.6 x 0.6 inches.

It is compatible with PORTER-CABLE model No. bn200v12, BN125A, BN200A, BN125, and BN200, stitch model No. Bt-35, Senco model No. SLP20, Paslode model No. 2138-F18, mA kit a model No. AF501, duo fast model No. BB444, Hitachi model No. nt45a, airy model No. Atk0241 and Atk0250.


Superior Parts SP 907198 Aftermarket Feeder Torsion Spring for Porter Cable RN175


amazon-buy-buttony

Feeder torsion is used to control the tension. It is a superior part. The weight of the part is 0.8 ounce, and the dimension of the part is 1 x 1 x 0.8 inches.

This part is compatible with various porter cable models.


List of More Porter Cable Nail Gun parts

There are some other parts for nail guns are available. They are-

Hxsochd, SPRING WASHER, Seal, Spring, Gasket, Collar, Bumper, Driver Seal, Trigger Valve Head, Filter Support, Trigger Valve Stem, Trigger Valve Guide, E-Ring, Pushing Lever, Rolled Pin, Pin, HOUSING W/SOFT GRIP, Air Tool Oil (18Cc), SAFETY GLASSES, Latch Carrying Case

FAQs 

  1. How to oil porter cable nail gun?

– Open up your air input line and tip the oil into it. After that insert the air hose pipe so that the oil goes into the parts inside.

  1. How do you load porter cable nail gun?

– Take the nails and load it to the loading point and after that push the loading up button to fix that nail. For a nail gauge, you need to do the same task.

  1. Why porter Cable Nail Gun leaking air?

– As the nail gun has very high moving speed the parts of the machine get damaged and the compressed air begins to leak at that time. Some part of the nail gun is made of rubber and they get torn for airflow and heavy speed moving.

Final Note

You need to be more specific in choosing a part for your nail gun and know every detail about the parts. Whatever, you need to be more cautious in using a nail gun as it is a mechanical and electric device.

These parts are must need a component for a nail gun, and you should choose porter cable nail gun parts wisely.

Learn More Nail Guns Parts:

Table of Contents

Leave a Comment

shares