There are many ways you can enhance the outlook of a room. The addition of matching walls and curtains or small and big lamps can easily bring attention to the studio or office.
A big painting does the trick too! However, flooring and ceiling can take the room to a whole new level.
If you are a nature lover and want to bring that aesthetic to your house, you need wooden floors. But can you guess what you need for furnishing wooden floors? If your guess is the best flooring nailer, then you are correct!
Wooden slabs are hard and robust. You can choose to hammer and nail your way through the wood, but that will take ages. So, the next best thing is to use flooring nailers. They finish not only fast but also provide an excellent outlook.
5 Best Flooring Nailer Reviews
If you want to take the wooden flooring job seriously, then you must invest in a good flooring nailer. However, there are different types of nailers with a gazillion features that you can choose. So, we have gathered the best of the best and made a comprehensive analysis so you can do thorough research.
The job of a carpenter is not easy. It needs dedication and patience. However, you do not have the entire day to work on one piece of wooden slab. If you want to breeze through the entire process of nailing, then make sure you look for Bostitch nailers.
These tools are designed with the motive to help you nail with more comfort and ease. The construction of the device is just perfect. It reaches the hip of the user and allows him to hold the handle with one hand while hammering with the other. As a result, the user can do the job in a standing position rather than bending down.
Besides the design, the tool itself needs to be robust. Without internal strength, the machine will fail in providing a strong drive-through. But it also needs to be lightweight and portable. So, the best material to build such a tool is sturdy plastic. Bostitch made sure the plastic is durable enough to handle the hammering.
Another essential feature is the nose of the tool. It is pointy, but the edge is flat, which perfectly fits on the wooden slab. The proper adjustment helps in applying adequate pressure and resists scars or dents on the flooring. And the base plate is 12.7 mm, and since the tool is pneumatic, it does not need any electrical connection.
Hence, the user can carry it to any corner. It is a versatile tool as it can operate with two types of pins: L-shaped flooring cleats and flooring staplers.
Each of these pins has a different purpose, and the user can get the benefit of both using this tool. It comes with extra accessories such as a dust cover, wrench, a mallet, and interchangeable base plates.
- Ergo economical handle
- Interchangeable base plates
- 2-in-1 tool
- Deep drive through capacity
- Pneumatic power
- Extra accessories
- The feeding system is complicated
The ability to wrap up a project on time is considered handy in every profession. Using a tool such as a nailer for hammering wooden slabs together can increase work efficiency. But you might want an even better run time. For such users, DeWalt has the perfect tool.
This model is a pneumatic nailer. It means that the motor runs on compression and hammering strength. Many flooring nailers follow this process in the market. What makes DeWalt so unique is the reduction of CMF requirement. The usage of less CMF helps in reducing compressor run time.
As a result, you can shoot quicker, which eventually increases speed. This tool is ready for a challenge. Some users have even dubbed it as ”Rock Solid.” The machine acquires such durability and strength from the top quality material with which it is constructed.
Moreover, the nozzle and the hammer pad are made with stainless steel. The rest of the body comprises of hardcore plastic. These materials are heat-resistant and will not break down from the constant banging. You will get a white rubber mallet with the tool. The purpose of the mallet if to set the compressor off.
After that, you have to hit the hammer pad with the mallet. The white mallet creates fewer stain marks. So, the machine stays cleaner for a more extended period. This tool has a long neck for back support. You also get a rubber-padded handle for a better grip. The bottom part also has rubber foot to keep the machine in place.
You can store 100 pins in one magazine. It supports 16 Ga length of L-cleat nails and 15 Ga staples. Hence, you can have two different finishes with one tool. The interchangeable base plate also provides flexibility to the appliance.
- Long neck
- Rubber handle and rubber foot
- Better grip
- Low compressor run time
- Compatible with two types of nails
- Weighs 10.6 lbs
- No mark mechanism
- Accurate pressure application is necessary
3. NuMax SFL618
When you buy a new product, you secretly wish it can do all types of work. Otherwise, you have to take another hassle of buying the other necessary products. Instead of all this dilemma, go for a NuMax SFL618.
The significant advantage of this product, in particular, is it can work with three different pins. Hence, it brings versatility to the table. The NuMax can use T-cleats, L-cleats, and regular staplers.
L-cleats work great for stacking and nailing while T-cleats can hold two slabs together. The L-shape means it bents in one direction while the T-shape curves in two ways, like the alphabet T.Staplers, are usually great for softer wood but can be used on hardwood too.
This machine is also a pneumatic machine. It means the tool needs compression, hose, and a mallet. However, the process is straightforward. All you have to do is station the tool on the floor. Then hammer on the pad with the mallet. The tool is incredibly lightweight despite its aluminum body.
Usually, metals have some weight, but aluminum is used to reduce the weight but keep the usefulness of metal. This material also ensures heat resistance. As a result, the motor will not sustain any damage from a high level of compression.
Moreover, the manufacturer painted the entire body with a gray shade, which gives the machine a cleaner and sophisticated look. So, overall, it weighs 16 pounds, which is ideal for a standing nailer.
Besides the weight, this power tool also has suitable dimensions. The height of the device is 22.8 inches, which reaches the perfect length for the user. Also, the long neck helps support back muscles reducing the chances of body ache. The handle is also ergo economically made.
- 3-in-1 tool
- Lightweight aluminum body
- Heat-resistant features
- Works on different woods
- Air-powered machine
- User-friendly design
- It costs more for its 3-in-1 function
4. Valu-Air 9800ST
Sometimes the accessories needed by the nailers are exclusive to that brand. Although using a brand-specific attachment is safe for the tool, it makes the process a bit difficult. If by any chance, the accessory stops working, you will not be able to swap it for another existing item.
The good news is, with the Valu-Air, you will not face that issue. As the Valu-Air is air power-driven, it needs fuel and compression. To derive the fuel from the tank to the engine, you need a hose and another vortex creating a motor.
Although you will get a hose with the machine, it also has the added feature of .25 NPT, which allows you to fit any air hose coupler. Consequently, you get more options in the off chances that your hose has leaks.
Besides such minor improvements, this machine is capable of essential jobs too. It has the classic long neck of a standing nailer. But another addition is the longer handle.
Hence, the entire process of hammering with one hand becomes more comfortable. The hammer pad also has adjustments. The improved handle provides a more significant surface area for a better grip.
Moreover, the mallet provided has no-mar rubber, which protects the hammer pad from unwanted scars and dents. The body is made of heat-treated material, and it is orange in color. Hence it will be more visible. Since it weighs 13.3 pounds, you can work with it for a longer time, and it can run for more time as well.
Furthermore, the air-power machine does not have limitations to working hours. The Valu-Air is excellent for professional use as it can function with four different pins. It is compatible with staplers of two dimensions: 1.5 inches and 2 inches flooring staplers and L-shaped and T-shaped cleats.
So, the tool is an all-rounder when it comes to pins. The magazine is also spacious. Flooring plates are composite and interchangeable.
- Portable machine
- Equipped with .25 NPT
- Operates with four shapes of pins
- Heat-treated body
- Great for professional use
- Wider handle
- No-mar rubber mallet
- Not suitable for home projects or personal use
5. Freeman Nailers
Freeman is a leading nailer manufacturer and they have a number of models that you can purchase. However, we have gathered three relevant models below that you can use for your professional or DIY projects.
Also, this machine is robust as it is built with heat-resistant aluminum. The processed metal makes for a lightweight and portable device. It is black and weighs 9.68 pounds.
This product is another great model by Freeman. A professional can get lots of work done with this model as it supports three different kinds of fasteners. You can use two different lengths of gauge nails: 15.5 inches and 16 inches.
Rounded staplers which are suitable for softwood is also compatible. It is a pneumatic machine that uses air power to run. To help the process, the model comes with several attachments and safety gadgets such as goggles, a mallet, and a storage kit. The PFL618BR is also made of aluminum material.
Having the facility to use both of these is a bonus. On top of that, you can use staplers too. This tool is metal-made, but it is still portable. You can use it for roofing, framing, and flooring. The combination of black and orange makes the product stand out more. Overall, this Freeman model is durable and worth the dollars.
- Aluminum-heat curated body
- Versatile and compatible compact models
- Ergonomically designed
- Air powered
- The base plate might adjust poorly
How to Choose the Best One
There are different types of wood, and you want different finishes each time. Maybe you want the same finish too. Whichever is the case, there will be a nailer for you. However, you need to know which feature of these nailers will best suit your mood. Hence, we recommend you follow a guide to know more about the features.
Nailers have different ways of functioning. There are pneumatic nailers, manual nailers, electric corded nailers, and even finishing nailers. Each of these has a different method of running the motor, but they can certainly be the best pneumatic flooring nailer.
A cost-effective way of getting the job done would be using manual nailers. The outlook of these nailers is the same as a pneumatic nailer, but you will have to put some energy into making a hole.
However, it is still a more relaxed way than hammer and nails. Pneumatic nailers use compression and fuel to power the motor. You will still need to use a hammer. But the need for manual labor is less to nothing.
The corded electric nailers and finishing nailers use electricity or battery to generate power. And the finishing tool can take care of edges, and some electric nailers can reach smaller spaces. So, based on the user’s need, they can choose a nailer.
This segment comprises the exterior design of the tool that effectively increases the total outcome. Every standing nailer should have a long neck handle that allows the user to hold it and use it in standing position. This attribute will prevent muscle pull and eventually increase the working hour.
Another useful design is to add rubber grips on the handles. The grips should help in absorbing sweat. Hence, the user will be able to work with more accuracy.
On that topic, the nose and base plate should be leveled. The unevenness can create unwanted dents on the wooden slab. So, the user needs to watch out for these features if they want a comfortable tool.
There are many ways following which the brands can install safety features in these power tools. An easy addition would be a filter sheet. The purpose of the layer would be to protect the motor from foreign particles, such as dust and debris. Often times, the accumulation of waste causes the engine to generate less power.
Sometimes the machine can heat up too. In such cases, a filter sheet could be helpful. Jam-free shooting mechanism can be employed to reduce the amount of nail breakage. It will save money and resource. If pins can be deposited smoothly, the chances of accidental pinning can be avoided.
Besides these, a simple addition of rubber handles and rubber foot can prevent the machine from sliding. Thus, the user can obtain better control.
How the manufacturer makes each of the components is very important for a nailer. It has different parts that operate for various reasons. Such as, the handle is there to help the user get more comfort. On the very bottom is the base plate and the nose, which need to be perfectly balanced.
The outer body needs to be sturdy too to hold all the pieces together. But at the same time, it needs to be lightweight.
So, users should look for durable plastic made nailers. They will offer more portability and ease of use. The base plate and nose should be made of metal.
Otherwise, they will break on impact. For pneumatic nailers, the compression hose should not have any leaks. If there are leaks, eventually it will add up to the loss of fuel.
Types of Nails
Knowing which kind of pin to use is crucial. You can potentially damage the flooring or the wood if you use the wrong sort of fastener. Another reason why you should look into pins and staplers is that every nailer has its own set of rules.
You cannot use a headless pin on nailers that does not support that length. Typical gauge nails, L-shaped or T-shaped cleats, and brad nails are used. Nailers also use staplers.
Finishing nailers have a special kind of pins called headless pins, which are practically invisible on the wooden surface. The user should also consider knowing which size is supported by their nailer. Usually, 1 to 2.5 inches are widespread. The right nail in the right tool can make or break the process.
Bringing this factor into consideration is critical. Because why should you buy a stand-alone product if there is a possibility of doing more with one product? Multiple models are capable of carrying out two different tasks, such as the NuMax or DeWalt models, which are compatible with cleats and staples.
Besides cleats and staples, there are also headless pins and brad nails. So, if the user needs versatility, they should monitor and choose that is compatible with different kinds of fasteners. Besides pins, the tool should also be able to adjust to various woods.
These tools should be able to cope with different wood texture and finish. If a tool checks all these boxes, then you can consider it to be the best hardwood flooring nailer.
Types of Flooring Nailers
There are many subcategories of flooring nailers. However, they are only two primary types. These are the Pneumatic Flooring Nailers and the Air Flooring Nailers. You need to fully understand the difference between the types to know which to get. So, here is a brief overview of what these types actually are.
Pneumatic Flooring Nailers
These nailers are powered by compressed air that pushes the nail out with a lot of force. Its high force allows it to push out larger nails; however, it needs an air compressor to run. As such, its build is more complex and nuanced compared to air nailers.
This increases its need for maintenance since you have to take care of additional parts. So, this is the type of nailer you want if you are dealing with larger nails on a regular basis.
Air Flooring Nailer
You would think that air flooring nailers would use air compression like the pneumatic variants. However, they actually use gas instead. This type does not need big compartments, making it much smaller in size comparatively. As a result, it is much more comfortable to hold and use, as well.
This operates by creating small combustions to launch the nails out. Its smaller stature makes it incompatible with large nails. So, if you are going to deal with smaller nails, then this is the type you are looking for.
Flooring Nailer vs. Flooring Stapler
It is pretty common for people to think that a flooring nailer and a flooring stapler are essentially the same things. And it is understandable why people would think so, but that does not change the fact there are quite a few fundamental differences between the two that set each type apart. So, let us go over some of these differences.
By now, you should already be quite familiar with what nailers are. We have spent this entire list going over the best ones, after all. A nailer is shaped like a gun. It has a handle where you place your hand, and when you pull the trigger, nails shoot out. The nails are shot in different ways.
One way is to use air compression, while the other is to rely on gas combustions. We have already discussed these methods in the previous section. Another essential point to remember is that nailers are more expensive than staplers.
This tool, as its name implies, uses nails, which are costlier. However, it makes up for these expenses as it is so easy and effective to use. In general, more people are accustomed to nailers.
There is a good reason that this design has stood the test of time, lasting longer than three decades already. They are marvelous against tough wood and is very easy and fast to use. It is the prime option for anyone who wants quick and efficient work.
So, you should get a nailer if your workpiece is hard and requires more penetrative prowess. The extra costs will be more than worth it.
Just with a single glance, you should be able to tell that this is very different from a conventional nailer. Its shape is much larger, and you cannot rely on just one hand to use it. You have to use the handle to set it up and align it to the place you want to staple.
Then, you have to take the included mallet and hit the knob on its back to use it. This is more time consuming for a small workpiece but ultimately helps you save time for larger pieces since you can move it sideways while maintaining alignment easily and quickly.
As a result, you get to change your positioning comfortably. Staplers are also cheaper to buy. So, they are, in general, cheaper to maintain than nailers. Of course, they are less efficient and feel more taxing to use as well. They also cannot penetrate harder workpieces.
So, if you need something to handle soft wooden floors, then a flooring stapler would be the ideal choice for its cheap maintenance and suitable purpose.
Frequently Asked Questions
Here we have some of the most commonly asked queries regarding flooring nailers:
- Is there a difference between pneumatic and manual nailers?
Yes, pneumatic nailers use fuel and pressure to create motion for the motor. Manual nailers use mechanical energy for creating movement. The engine functions the same, but the process of acquiring energy is different.
- What kind of pin is suitable for hardwood?
L-shaped or T-shaped cleats are suitable for hardwood as they have a bent head. The curved head will make sure that the pin does not come undone.
- Is plastic durable for nailers?
The international grade, which is durable and heat-resistant, is essential for nailers. Otherwise, the weight of the product will increase, and it will become less portable.
- How thick can the sheets be?
The thickness of the sheet depends on the product. If the nailer is a standing pneumatic nailer, then it can be thick, but for cordless finishing nailers of handheld nailers, the sheet should be thin.
- Can one nailer only work on one type of wood?
No, one nailer can operate on multiple types of wood.
- Can the nailers be folded?
No, you cannot fold the nailers. If a compact nailer is needed, there are handheld nailers available in the market.
- Is oil necessary for maintenance?
Yes, a few drops are necessary for lubrication and maintenance.
Wanting wooden floors and not choosing a nailer will be a silly decision to make. The best flooring nailer combines luxury and ease of use, and it will not break the bank either. Why waste time and energy trying to pick a hammer when you can nail your way to a beautiful wooden floor!
More Nail Guns Reviews & Buying Guide
- A Look at Best Cordless Framing Nailer Reviews
- Which Is The Best Cordless Brad Nailers in The Market?
- The Best Cordless Brad Nailers Recommended For You.
Sup? This is John Boson signing in from my very own Garage and Woodworking station here! I hate to introduce myself as an expert, rather I am more of a person who loves to share the knowledge for people’s interest. Ping me at email@example.com to let me know if my job on this website has helped you or not. Also, you can request for my honest review or a piece on any know-how topic for what I will try my best. Cheers! Signing out!