There’s nothing more annoying when working on a workshop or industrial place than having to do so with tons of dust and debris around!
It becomes a hassle and a potentially dangerous environment after some time, especially when there’s no time to clean.
For those moments when cleaning becomes the last thing to do, the best cyclone dust collector would become the perfect product to get rid of every annoying piece of debris and dust particle.
This way, you can transform even the most inhospitable place into the best environment to work. Whether it is a homemade workshop, a construction site, or in an industrial facility – a cyclone dust collector can be a fantastic product to have.
Here, I will explain all you need to know about this machine, the different options in the market, and much more. Come and see it!
Why Use a Cyclone Dust Collector?
Using a cyclone collector is not just about keeping your workplace clean. There are also several other benefits you get when you start using one of these. Here we explain the three main ones;
Yes, working with tons of dust, small debris particles, and everything in between can be pretty dangerous for your health. And if you are allergic, this could be even fatal. So the best way to maintain the working environment clean would be to use a cyclone dust collector to prevent any health issue.
It’s important to remember that dust is one of the most common carcinogens in the world. So you will not only preventing damage to your lungs that could cause allergies or severe lung diseases, but you’d be preventing cancer which is way worse than any other disease out there.
When the floor is filled with dust or debris, it is easy to misstep and slip off the floor. This happens very often in workshops and woodworking environments, especially when there’s no dust collector to get rid of the excess of sawdust and shavings.
That’s why it can be critical to use one. You don’t know when a small trip for not cleaning may eventually end up in an arm fracture, a head concussion, or worse. So instead of leaving your luck to the world, you can use a cyclone dust collector to get rid of all the potential dangers in the workplace.
Fires & Short Circuits
While it seems a little difficult to happen, it is more common than you think. Sawdust, debris, and other woodworking & metal-working residues tend to leave a lot of space for possible short circuits and fires. All these residues tend to be highly flammable so even the smallest electric current issue can create a big flame.
This is undoubtedly dangerous, there’s no point in explaining this. That’s why having a cyclone dust collector can be the best way to prevent it from happening, primarily if you work with stuff that uses constant electric current.
Cyclone Dust Collector Reviews
No need to go over the whole Internet in search of the best options when you can instead just read our reviews. Yes, if you want a cyclone dust collector for your workshop or garage, then you’ll find the perfect choice here!
It wouldn’t be a proper article without adding a Grizzly cyclone dust collector review. It delivers everything you could expect from a cyclone dust collector, starting from a fantastic cyclonic action alongside a 55-gallon steel drum that stores lots of dust & debris.
This collector performs like no other, coming with an amazing 3 HP motor and a wide 15.5-inches diameter impeller that will suction everything effectively and without issues. But still, this machine has many other features to consider.
The 3 HP motor delivers an amazing capacity so you can get rid of dust & debris very effectively. It manages to provide up to 1654 CFM and 2.0 SP for fast and robust suction capacity, so it doesn’t let any dust behind.
You just need to turn it on using the magnetic remote, and it will start suctioning all the dust from the place without problems.
Great Storing Capacity
While the dust travels through a 15.5-inches impeller tube and then reaches the 55-gallon steel drum. Here you can store so much dust and debris that it’s just amazing. This machine comes with a plastic bag tank that you can eventually thrash out wherever you want along with the small particles.
You will get the chance to clean up to 113 sq. ft. of space; thanks to its suction capacity. This makes the Grizzly a perfect choice for anyone working in a large facility.
Excellent Filtering System
Yet, all of this works amazingly well with a filter system that captures up to 99% of all large dust particles. Even the smallest piece of dust will get trapped inside the machine. The filter cartridge made of polyester cleans the dust and prevents the largest particles from staying on the drum.
Eventually, the filter shakes off all the particles to store them in the tank so you can get rid of them later. This filtering system is a wonder, especially with its amazing cyclonic action that separates large and small particles. Read the full Review: Grizzly G0441 3-HP Cyclone Dust Collector
- Completely easy to use with remote magnetic controller
- Superb performance with 3 HP motor and up to 1654 CFM
- Gets rid of tons of dust; thanks to its 55-gallon drum capacity
- Large impeller with 8-inches duct for better collection
- Sound reducer doesn’t work as advertised
- Inconvenient 55-gallon drum makes it hard to move & transport
Something that cannot be missed when talking about cyclone collectors is an excellent pair of Jet dust collector reviews. With the JCDC-3 you have probably the most efficient option out there, coming with a mount-filter, remote control using radio frequency, a giant collection bin, and much more.
It doesn’t leave anything behind so you can enjoy the perfect dust-collection system that prevents your workplace from becoming unfriendly. Instead, you can use the JCDC-3 dust collector with 3 HP and get rid of all the unwanted dust & debris particles.
Filters Like No Other
One of the main features of this fantastic collector is the ability to filter the dust effectively using a direct-mount filter. This type of filter doesn’t minimize airflow with awkward hosing or bends. Instead, it eventually increases the efficiency of the filtration system and allows you to capture more dust faster.
It works with a set of pleated materials that captures small particles of up to 1 micron. So you can get one of the most effective filtration systems out there, all within the same product.
Exceptional Dust Collection
A 13-AMP motor capable of delivering 3 HP of power and up to 1250 CFM makes this machine one of the most effective out there. Getting rid of dust will be a piece of cake, especially when you add the built-in filtering system that doesn’t reduce capacity in any way.
All the dust passes through a 15-inches impeller and reaches the 66-gallon drum. This drum comes with quick-release levers so you can get it off and thrash the contents at any moment without problems. The best of all is that you can connect it to either three 3-inches ports or one 8-inches duct for versatile suction.
Completely Easy to Use
Apart from filtering dust like no other and providing a fantastic performance, this machine is also a piece of cake to operate. You will receive a remote control with radio frequency that you can use up to 50 feet away without any problem. This remote comes with timers from 2 to 8 hours so you can make it work automatically.
Apart from that, you get a double paddled manual cleaning system that makes cleaning straightforward. And with the integrated swivel casters, you can transport the machine wherever you want quickly.
- Amazing direct-mount filtration system for uninterrupted suctioning
- Excellent performance with1250 CFM of suctioning capacity 3 HP of power
- Huge & convenient 66-gallon drum with casters & quick-release levers
- Superb operation with radio remote control and 4-mode timer settings
- The remote control is pretty cheap and fragile
- Very challenging installation process
There were an additional Jet cyclone dust collector reviews missed; the JCDC-2, a highly reliable 2 HP dust collector that delivers outstanding suctioning capacity to get rid of all dust & debris on your workplace. It is a large yet highly efficient choice for medium-choice facilities and workshops.
It delivers everything from ideal CFM capacity to excellent mobility & convenience options for easy controls. You don’t have to make much of an effort to trash the dust out either, and it manages to provide an exceptional filtering system for constant suctioning. And there’s still more to it.
Small But Effective
The cyclonic process of the machine allows it to use up to 940 CFM of airflow to get rid of more dust on your workplace. This dust passes through the filtration system directly to the drum without stopping, which gives the small collector an effective & continuous performance.
On top of that, all the dust gets collected in the 30-gallon drum that makes it easy to transport and thrash out thanks to its small design but also additional swivel casters.
Using a remote control with radio frequency, you can manage the machine from far away without problems. You just need to turn it on and choose between four different timer options from 2 to 8 hours accordingly.
The machine is also a piece of cake when cleaning, as it comes with a pleated material that filters the dust which you can manually get rid of with little effort.
Using a direct-mounted filter, you can enjoy excellent performance that prevents the machine from stopping when suctioning. However, this also eliminates problems when cleaning and increases overall capacity despite its small 30-gallon tank.
The pleated material in the filter increases overall filtering performance as it gets rid of particles as small as 1 micron or even tinier than that.
- Excellent operation with remote control & straightforward cleaning system
- Continuous performance with a direct-mounted filter using pleated material
- Small but highly convenient 30-gallon tank with swivel casters for mobility
- Outstanding performance with up to 940 CFM using 2 HP of power
- The very complicated installation process with confusing instructions
- Uncomfortable and unreliable remote control
You cannot talk about dust collectors without having some Shop Fox dust collector reviews. This is one of the most dependable brands out there, and the magnificent W1823 is the perfect reason why. Being a medium-size collector with a 1.5 HP motor, you can expect it to offer exceptional performance.
Everything from the handy drum for storage and the highly reliable filtering system makes this Shop Fox dust collector one of the best in the market. And despite all that, it still manages to be really easy to move around and transport if needed, so you get a hugely functional but handy product.
First-Rate Suctioning Capacity
So it has 1.5 HP of motor power, which means you get enough capacity to get rid of tons of dust in your workshop without problems. But it is the 806 CFM that makes it so amazing, working with up to 3450 RPM, so you hear almost nothing when this machine does its job entirely.
The whole build of the product is designed to keep it working amazingly well and fill the 20-gallon tank in a matter of minutes.
It is not precisely the smallest option, but still, one of the easiest to transport out there. Coming with a 20-gallon tank and a set of casters in the bottom, you can move this dust collector anywhere without problems.
You can make this work really well alongside the Y-Fitting in the mouth that allows two connections of 6-inches and 4-inches accordingly. This way you pair up its portability with a fantastic capacity to aid two woodworking machines at the same time.
Very Easy to Use
Coming with a radio frequency control that works at up to 75-feet away, you could say this dust collector won’t be a problem to use. It offers an ON and OFF button with additional timer and settings for your collector.
For even more convenience, the drum offers excellent functionality with a crystal window that allows you to see inside, a quick-release lever you can use to remove the drum when cleaning, and more. The cleaning gets even easier when you add the internal brush mechanism for the filters.
- Exceptional design for portability & handiness
- A tiny but strong motor at 1.5 HP and 860 CFM for excellent dust collection
- Straightforward design and features that make overall operation easy
- High-quality design & features for the easiest cleaning process
- Small design and motor won’t work with big facilities
- Can be pretty loud and annoying to use
When you go through several2HP dust collector reviews, you’ll find that almost none offer what the Baileigh DC-1450C offers. This fantastic machine will take your dust collection system to another level, working for several hours a day without failing to provide excellent performance.
Not only it is one of the handiest options out there, but it also manages to provide a clean performance with an amazing filter, a practical operation with remote control, and even works with a low noise level. You can get the most out of this machine without leaving anything to desire.
The ability to work with 2 HP and provide up to 1450 CFM makes the Baileigh DC-1450C a performance-oriented machine that won’t let you down in any way. Just hook it up to a 220v outlet and enjoy its superb performance for up to 8 hours without issues.
You can attach up to 2 different hoses at 6 and 4 inches accordingly so you can enjoy superior collecting capacity. In small and medium workshops, this dust collector will probably come like a gem, even if you have multiple machines working at the same time.
Superb Filtration & Storage
The pleated filter design gets rids of small particles as little as 1 micron, so you don’t have to do extra cleaning when using it. You could say it purifies your workplace air so you can enjoy a friendlier environment.
All the dust goes to either the 28-gallon steel drum or to a finer-dust bag so you can thrash them according to your needs. Once the bags are filled, you just need to get rid of the dust and debris, turn the filter handle that gets rid of filter buildup, and keep using the machine until it feels again.
Along with the small 28-gallon storage drum, you get four casters or wheels that make overall mobility of the product pretty easy. This way you can thrash the dust conveniently without wasting any time or effort.
The real advantage comes with the assembly process that takes no more than 2 hours, making it one of the easiest to install. Once you’re done the assembling, you just need to pick the remote control with radio frequency, turn it on, and set the timer to the desired number of hours and that’s it.
- Unbeatable performance with 2 HP at 1450 CFM and still pretty quiet
- Tiny and portable 28-gallon storage drum with easy-thrashing design
- Straightforward assembling process with easy-to-use controls
- Handy filter with pleated material that gets rid of 1-micron particles
- Using two hoses can exponentially reduce the capacity of the product
- Can be pretty hard to clean
You won’t have to get the largest and most expensive option if you just need a small machine. That’s precisely what the Deluxe Anti-Static Cyclone Separator offers with a Oneida filtering system. It is the best cyclone dust collector
for the money as well so you can get great results without breaking your wallet.
Despite its small design, this machine manages to provide exceptional results without leaving anything to be desired. If you have a small workshop and only need something that gets rid of a few dust particles around, then this dust collection kit will be a perfect choice.
Extremely Effective Performance
The machine comes with a centrifugal cyclone process that gets almost 99% of all the dust and debris in your workplace. It will make your small workshop pretty livable and easy to work in, so you don’t have to be regularly sweeping the floor or opening windows.
And with this efficient performance, you get a product that doesn’t let its filter clog. This way you can work for several minutes and even hours without problems.
Outstanding Wet & Dry Capacity
The Wet/Dry performance of this machine helps to achieve more and better-suctioning capacity than most of its kind. Even for its small design, you can enjoy the 2-inches ports to attach any type of hoses and make sure your workplace stays clean from dust & debris even if it is all wet.
But this machine doesn’t only work with dust, you can actually clean anything from baking flour, grass, leaves, animal hair, drywall and concrete dust, metal shavings and much more. So you’re getting an amazingly useful and hugely versatile cleaning machine.
Convenient & Long-Lasting
Using this machine is a piece of cake, even when it comes to getting rid of all the residues. You just need to detach the collector tank in a matter of seconds and push it wherever you want to thrash the content. This happens thanks to its straightforward design and small wheels in the bottom.
And still, this machine manages to last a lifetime. Yes, it is one of the most practical yet durable options out there. Coming with less mechanical parts and a simple dust-collection process, you can expect it to last a lifetime.
- Fantastic wet/dry suctioning capacity for a more effective performance
- Outstanding design for easy operation, cleaning, and portability
- Hugely reliable build and design for a more durable product entirely
- Versatile performance for cleaning practically any kind of dust or debris
- Pretty small design and underpowered motor makes it unusable for large facilities
- Demands installation of a pump & leg system for it to work
Considerations for Buying One for Your Shop
Whatever the size of the woodshop, it is necessary to have a cyclone duster. However, not all products will work the same way, so it is critical which one to use.
Here, we will explain how the size of your facility, your overall dusting needs, and the performance of the product matter. Take a look!
Size & Versatility
This is probably the most essential part, even though it is not necessarily related to performance or capacity. The size of a dust collector lets you know whether it fits in your workshop or not. But it may also tell you the size of the motor and how much dust you can collect.
If you want the best cyclone dust collector for a small shop, for example, you’ll want something tiny, but that offers enough dust collection. For this, consider the measurements of the product but make sure you have the dedicated space for the machine already measured.
You’ll have to consider how versatile the product is as well. Some collectors offer the chance to add up to three or even more hoses to the device through several dust ports. This way you can get rid of dust in several places of your workshop at the same time.
So it’s essential to consider not only the size of the machine and the space on your facility but also how much versatility you’re going to need. If you are going to move a single hose around your workshop, you may eventually break it or just waste too much time. Instead, pick a collector with several ducts.
While this is directly linked to the size of the product, the portability comes mostly to how easy it is to move the collector around. When you have a small shop, you won’t need a product that moves around, but if you have a large facility, this will be ideal.
For the largest facilities out there, a big apparatus can come very handy. However, if it doesn’t move from one place, you may eventually find it inconvenient if you can dust out specific locations. That’s why we recommend going for those collectors that you can move around and probably even carry if needed.
So make sure your dust collector offers the right portability depending on your needs. By reading our 1 HP dust collector reviews, you may find the ideal one for a small shop. If you want more capacity but still excellent mobility, a 2 HP dust collector may be enough. Most 3 HP collectors tend to be really huge & heavy.
Motor & Air Capacity
After going over the 1 HP and then 3 HP cyclone dust collector reviews, you should know that all models are offering different capacities so they may work more or less efficiently accordingly. This motor capacity is mostly measured with HP (Horse Power), and the more you have, the strong the suction.
However, you may also want to think about the CFM (Cubic Feet per Minute) which is the amount of air the machine can suction per minute. For the largest options, a 3 HP motor with 1500 CFM or more can be perfect. If you want something small, 1 HP at 500 CFM up to 2000 CFM will be enough.
Another thing related to the size of the product, the bottom tank size will come directly linked to how big and powerful the machine is. Here you’ll also need to consider the bag of the product, the one that comes at the sides.
For large dust collectors of 3 HP, for example, you are going to find tanks with no less than 40 gallons of storage capacity and up to 80 gallons in the largest ones. The smallest 2 HP and 1 HP collectors will not pass the 50-gallon capacity.
As for the size of the bag, there’s nothing much to consider, as most of them come at around 10 or 20 pounds of capacity. But because these bags are for smaller pieces of dust & debris, you won’t need much as it very rarely fills completely.
Last but not least, the filtration system will also have lots to do with the effectiveness and overall efficiency of the product. This filter is usually located close to the motor, and it filters the small particles from the large ones. So it separates them into a bag for small particles and the tank for large ones.
All filtration systems are different. Some come with pleated materials that filter really small particles of about 2 microns to 1 micron. Others such as the polyester filters can filter particles as minimal as 0.5 microns or even less. The finer the screen, the more dust it will collect from the outside.
Frequently Asked Questions
Cyclone dust collectors can be pretty complicated products to have, even more so when you aren’t entirely familiar with them. Here, we clarify some of the usual questions confused owners have:
Q: How long can I expect a cycle dust collector to last?
A: Normally, it may last a decade or more without issues. But it all depends on the amount of usage and type of storage the product has.
Q: Are there technicians for cyclone dust collectors?
A: Yes, but they are hard to find. So before making any change or doing any damage, we recommend to think it twice as you may eventually don’t find someone to fix it.
Q: How much time does it take to assemble & install a dust collector?
A: It depends. Some models are pretty easy to install and assemble in under an hour. Other models, especially the larger ones, can take up to four people and several hours to do so.
Q: Do I need to do any maintenance to my dust collector?
A: Yes, you should keep the filters cleans after every use or at least after a lengthy operation. This way you can prevent the filters from clogging and making the product work effectively for a long time.
Q: Can I upgrade the motor of my dust collector for a stronger one?
A: Generally, no. It takes an expert technician to do so, but most of the time it is impossible.
Installing a Cyclone Dust Collector
The process of setting up a dust collector is not really a hard job, but depending on the size & design of the product, it can change considerably. However, the general process goes as follow:
- Start by assembling the supportive legs. They are typically made of metal with a large space in the middle. In that space, you will place the collector tank once you finish with the legs.
- Then you can start by placing the filtering system over. It’s typically made of a large housing with several tubes or impellers that connect to the tank and the thrashing bag on the side.
- Connect everything and finish up by installing the motor. It usually comes apart from the rest of the machine in a single piece that goes either on top or on one side.
- Now you can start by connecting the impellers or tubes to the machine using the ducts. You can use one pipe or several ones depending on the design of the collector.
- Finally, just make sure the machine stands sturdily on the floor and that you connect it to the right electric outlet. Make sure not to use an extension cord unless it comes with the machine.
You’ll have now a completely functional and ready to use cyclone dust collector. Start it up to try and enjoy a dust-free woodworking place.
There are hundreds of options for collectors in the market, but not many offer what the ones we reviewed do. So instead of looking out there and spending hours of your time trying to find the perfect choice, choose one from this article and you’ll be saving time and money for sure.
We chose the best cyclone dust collector reviews taking into account all significant factors. So if you want the best product, you’ll find it here. Choose the one that fits with your needs the most, and you’ll get a great product.
Check Out: More Information
- Jet Cyclone Dust Collector Reviews [JCDC-1.5 1.5, JCDC-2 2 hp & JCDC-3 3 hp]
- The Dust Deputy Reviews – Compilation of 5
- The Grizzly Go4413 HP Cyclone Dust Collector
Sup? This is John Boson signing in from my very own Garage and Woodworking station here! I hate to introduce myself as an expert, rather I am more of a person who loves to share the knowledge for people’s interest. Ping me at email@example.com to let me know if my job on this website has helped you or not. Also, you can request for my honest review or a piece on any know-how topic for what I will try my best. Cheers! Signing out!